- Send to a friend
-
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
18,45 €
(139.00 HRK)
-20%
14,76 €
(111.21 HRK)
1 025,00 €
Packed with advanced...
248,75 €
48,75 €
112,00 €
No products added yet
Description:
Makeblock 2H Microstep Driver is a type of 2-phase hybrid stepper motor driver. It is designed for driving 2-phase hybrid stepper motor of all kinds with 20mm to 42mm outside diameter and less than 2.0A phase current.
Features:
Electrical specification:
| Input volltage | 12~36VDC |
| Input current | < 2A |
| Output current | 0.44A~2.83A |
| Consumption | 40W |
| Temperature |
Working Temperature: -10~45℃ Stocking Temperature: -40~70℃ |
| Humidity | Not condensation, no water droplets |
| Gas | Prohibition of combustible gases and conductive dust |
| Weight | 125 g |
Connection Type
May you are confusing about which color cable on the stepper motor should be connected to which port on the driver (A+,A-, B+,B-), Here is a guide of it
1. Our stepper motor has two phase. So it doesn't matter you change the connection order between phase A and phase B. Which I mean Black and Green could be connected to A orB, Red and Blue could be connected to B or A. And yes, it would change the motor direction.
2, And,
A+:Black A+:Green
A-:Green or A-: Black Both of the connection type are OK.
3, There is only one rule you need to follow, which is you can't mix them together.
For example, this kind of connection type is wrong, it would make damage to the motor.
A+:Red
A-: Black
B+:Blue
B-:Green
Documents:
