- Send to a friend
-
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
46,30 €
(348.85 HRK)
-10%
41,67 €
(313.96 HRK)
No products added yet
Model |
Bandwidth |
Real time sampling rate |
Rise time |
Memory depth |
Max capture rate |
Channel |
| MS510S | 100MHz | 1GSa/s | ≤3.5ns | 240Kpts | 190,000wfms/s | 2CH |
| MS520S | 200MHz | 1GSa/s | ≤1.5ns | 240Kpts | 190,000wfms/s | 2CH |
| Three isolated inputs include two oscilloscope inputs and one multimeter input, and all isolated inputs allow independent floating measurements with each input. |
|
|
|
|
|
Three operation modes for moving waveform, zooming in and out, and using menu by touch, button and scroll wheel. |
 |
|
|
I2C serial bus decoding graphic mode |
I2C serial bus decoding text mode |
Waveform capture rate offers how many waveforms display in a minute, "Dead zone" of oscilloscope is the time of processing and displaying the waveform which have been captured, during the time oscilloscope sacrifices any waveforms. the time of "Dead zone" is far more than "Display zone" for common oscilloscope, which results to signals can not be displayed in most time, so abnormal signals escaped. High capture rate oscilloscope reduces the "Dead zone" time and abnormal signals can be caught fast and accurately.
 |
|
|
High capture rate oscilloscope can catch occasional signal |
Common capture rate oscilloscope easy to miss the occasional signal |
|
|
|
|
|
Support various video triggers such as PAL,NTSC,SECAM,720P,1080I,1080P |
Connect to flask disk for dynamic recording |
|
|
|
|
| 240Kpts memory depth | The ScopeSuite of Micsig's software functions include updating, real time control, measurement, storage, dynamic display, record and data analysis. |
|
|
|
|
640 *480 high resolution |
Indoor /outdoor display mode |
|
|
|
|
31 auto measurements |
Horizontal cursor,vertical cursor,cross cursor |
|
|
|
|
3 types of record modes: multimeter record, oscilloscope measurement record and oscilloscope waveform record. |
13 physical measurements such as AC/DC voltage, current,resistance etc. |
Model |
MS510S |
MS520S |
| Bandwidth(BW) | 100MHz | 200MHz |
| Rise time | ≤3.5ns | ≤3.5ns |
| Real time sampling rate | single channel :1GSa/s,dual-channels:500MSa/s | |
| Memory depth | single channel :240Kpts,dual-channels:120Kpts | |
| Isolated channel | support | |
| Max waveform capture rate | 190,000 wfms/s | |
| Serial bus trigger | UART、LIN、CAN、SPI、I2C、1553B、429 | |
Vertical system |
||
| Channels | 2 oscilloscope channels,1 multimeter channel | |
| Limited bandwidth | 20MHz | |
| Coupling modes | DC,AC,GND | |
| Input impedance | parallel 1MΩ±1% with 15pF±3pF | |
| Vertical sensitivity range | 5mV/div~50V/div | |
| Vertical resolution | 8bits | |
| Max voltage input | 600V CAT Ⅱ 300V CAT Ⅲ | |
| Floating voltage from CHs to GND | 1000V CAT Ⅱ 600V CAT Ⅲ | |
| DC vertical gain accuracy | 5mV/div~50V/div, 2.0% | |
Horizontal system |
||
| Timebase | 4ns/divs~10s/divs | |
| Timebase delay range | -12divs~50s | |
| Timebase accuracy | 20ppm | |
| Sample mode | normal average, pk-pk envelope | |
| Dynamic record | support | |
| Store waveform |
support internal waveform storage and flash disk storage
|
|
Trigger system |
||
| Trigger types | edge, pulse, logic, vedio （PAL,NTSC,SECAM,720P,1080I,1080P）serial bus（UART、LIN、CAN、SPI、I2C、1553B、429） | |
| Trigger coupling | DC,AC,High-frequency suppression,Low-frequency suppression, Noise suppression | |
| Trigger modes | auto, normal, single | |
| Trigger source | CH1,CH2,external | |
| Trigger inhibition range | 200ns~10s | |
Measurement |
||
| Automatic measurements | 31 types | |
| Cursor types | horizontal cursor, vertical cursor, cross cursor | |
Math |
||
| Operator | + , - , * , / | |
| FFT window settings | Rectangular, Hamming, Blackman-Harris, Hanning | |
Display features |
||
| Display screen | 5.7 inch TFT LCD touch screen | |
| Resolution | 640*480 | |
| 3D waveform display | not support | |
| Grid of waveform display zone | horizontal 12 divs * vertical 8 divs | |
| Format | YT mode , XY mode | |
| Interpolation method | sin（x）/x | |
| Persist | auto, 100ms~10s or ∞ | |
I/O port |
||
| Mini USB2.0 | connect to PC | |
| USB2.0 | connect to Flash disk | |
Multimeter |
||
| Multimeter type | 10 physical measurements ,such as voltage, current, resistance, capacitance, diode , etc | |
| Multimeter accuracy | 5000counts | |
| Multimeter display | max, average, min, values with time stamp; relative measurement | |
Data Logger |
||
| Logger content |
multimeter measurements, oscilloscope measurements, oscilloscope waveforms |
|
| Logger timebase | multimeter measurements,10s/div ~ 20min/div oscilloscope measurements 10s/div ~ 20min/div oscilloscope waveform 100us/div ~ 2min/div |
|
| Logger time length | 49s~ ∞ | |
Power |
||
| Power adapter | input:100-240VAC,50-60HZ,2A; output:12VDC,5A | |
| Battery | capacity:7.4V/6000mAh, Work time:4~5 hours | |
Work environment |
||
| Temperature | -20℃ ~ +50℃ | |
| Humidity | < 85%RH | |
Dimension |
||
| Size | 254mm*160mm*60mm | |
| Weight | main unit: 1380g (no battery), battery(standard): 276g | |
|
|
Standard
|
250MHz, 10X probe |  |
Standard
|
lithium battery |
|---|---|---|---|---|---|
 |
Standard
|
Multimeter table pen line |  |
Standard
|
USB cable Mini USB2.0 |
 |
Standard
|
Power adapter 100~240V,50~60Hz,2A; DC 12V/5A |
 |
Standard
|
Banana Jack |
 |
Optional
|
Handbag |  |
Optional
|
High Voltage differential probe |
 |
Optional
|
BNC adapter cable |  |
Optional
|
Instrument suitcase |
 |
Optional
|
7.4V/9000mAh lithium battery |  |
Optional
|
High frequecy current probe |
